Obut MATCH IT 1-grade striated boules

Specific properties

• Bounce suited to all playing styles
• A safe bet thanks to its reliable performance.
• Good resistance to impact marking.

Technical characteristics

• Steel : stainless steel.
• Finish : natural stainless steel satin.
• Hardness : half-soft over 115 kg/mm².
• Balance compliant with FIPJP requirements
• Range :
  • Ø 71 to 76 mm.
  • Weight 650 to 730 g.

• Feel : Soft-touch stainless steel for a good release from the hand.
• Wear : medium wear rate.
• Stainless steel : requires only minimal, occasional care.
• Petanque boules made in St-Bonnet-le-Château, France.
• Boules approved for competition use by the FIPJP.

• A set of 3 Obut Match IT 1-grade striated boules approved for competition use by the FIPJP.
• One jack engraved with OBUT.
• One temporary storage bag screen-printed with OBUT, leaving you free to choose your pouch at a later date.
• Supplied in a cardboard box. Dimensions 84 x 89 x 248 mm.

Finish

• When first purchased, the Obut MATCH IT 1-grade striated petanque boule has a natural stainless steel satin finish.

Care of your boules

• Depending on how intensively it is used, the kind of terrain, ambient humidity, etc., the Obut Match IT 1-grade striated competition boule may therefore require a little care and attention after each game and at least once a month if it is not used.
• We recommend using the Obut boule care product.

A tip from Obut : don't leave your set of boules in your car boot, as this can be subject to sudden changes in temperature, leading to condensation.
Such significantly damp conditions will be harmful to your boules in the long run, as they can cause oxidation.
So remember to take your boules out of the boot and store them in a dry place indoors.

What elements should you keep for the warranty ?

• The warranty card located on the flap of the box.
• The exterior facing label.